Irobot Cleaner » irobot vacuum cleaner

How to Operate the iRobot Roomba 535

Thu, 17 Dec 2009 16:00:04 +0000

The makers behind this irobot cleaner technology have made sure that using the iRobot Roomba is easy. Just to prove to how simple it is, take a look at the steps:
1. The iRobot Roomba 535 must first be carried to wherever you would like to start.
2. Then, pressing the Power button.
3. Press the Clean or Spot button, depending on which type of cleaning you prefer.
4. Included in the Roomba is a Dock button that allows the owner to instruct the robot to dock with its Homebase.
5. There is also the Scheduler accessory which allows the robot to begin cleaning automatically at the desired time set by the owner.
6. When the Clean or Spot button is pressed, the Roomba starts its work.
The contact bumper installed in the machine is able to detect walls and furniture so that it does not bump into it or break anything. The Virtual Walls can also be used to limit the areas. The infrared signal set by the Walls tells the Roomba which areas to cover. The infrared sensors found at the bottom of the unit prevent the mechanism from falling off stairs and ledges. They also have additional dirt sensors that detect dirty spots so that these areas can be cleaned thoroughly.
The design is based on the philosophy ofRodney Brooks, an MIT researcher and iRobot CTO. He believes that robots should be like insects that are equipped with simple control mechanisms tuned to their environments. The result behind this principle is the best cleaning aid that any household could possibly have.

How the iRobot Roomba Helps its Owner

Thu, 22 Oct 2009 16:02:26 +0000

As you clean your house, you make sure that every spot is covered and every piece of furniture is intact. But what happens if you also have other responsibilities to think of, and finding an ample amount to clean is impossible? Not to fret, because theiRobot Roomba is here to help you. You can now do your other chores because this tiny equipment can calculate the amount of time needed to clean based on the amount of dirt detected. The infrared signals are set to ensure that they don’t bump into objects while vacuuming away the dust collected on the floors and under the furniture.
Once cleaning has been completed, the Roomba stops and sings a few triumphant notes. If a Home Base comes with model, the robot detects it and docks itself to it as it rests. All you need to do is remove the dustbin from the rear and empty it into the trash. The later generations have an infrared remote control that can also be used to control the unit.
The Roomba, however, is not designed for deep-pile carpet. It is small enough to go under a bed or other low furniture. If the unit senses that it has become stuck, it stops and makes a mournful sound so that you can look for it and reset the work.
Ever since the dawn of the iRobot Roomba models, busy homemakers can now rest easy because they know that they have a cleaning aid that thinks for itself.

iRobot Roomba 535 best attributes

Wed, 21 Oct 2009 16:26:26 +0000

You can now focus on much better things to pass your time while you leave the cleaning entirely to your iRobot Roomba robot vacuum cleaner. This Robotic Vacuum will be your new dirt patrol. It picks up dust and dirt while you work. So what else can it do? Here is a list of its responsibilities
* It will effectively vacuum dirt, debris, pet hair, dust, allergens and more from carpets and hard wooden floors.
* The counter rotating Bristle Brush and Beater Brush work hand in hand, much like a conventional dustpan and broom
* The sturdy Bristle Brush is able to dig deep into carpet fibers so that your rig is free of dirt and dust. No more dust mites for you!
* The powerful vacuum grabs small and large chunks into its bin.
* The fine filter traps particles to ensure that they don’t go back out.
* It will clean the entire floor, even under furniture and hard-to-reach corner.
* It is able to detect dirtier areas and will spend more time cleaning them.
* The Spot Clean quick wipes out spills and concentrated mess.
* It can automatically sense ledges so that it avoids them. You know that your Roomba won’t fall off and break with these sensors built in.
* The only kind of work required from you is to press the Clean button while Roomba worries about the rest
* It automatically will return to its self-charging Homebase to dock and recharge between cleaning tasks.
* The anti-tangle technology keeps Roomba from getting stuck.
* It is able to schedule cleaning. All you need to do is add the optional Wireless Command Center.

iRobot Roomba robot vacuum cleaner modes

Mon, 19 Oct 2009 13:58:49 +0000

Modes of cleaning for the various models of irobot cleaner.
The iRobot Roomba irobot cleaner is today’s generation’s latest find in home cleaning and care, will clean the floors depending on the cleaning mode you select. The robot cleaner models basically have three cleaning modes:

Applicable for all the models made are the Clean Mode and Spot Mode. The former mode automatically calculates the size of the room while appropriately adjusting its cleaning time. It adjusts itself to measure the walls, corners, and barriers. The main purpose of the sensor is to spot out and internally mark the areas it cannot go to. This mode is most often chosen by those who want to cover every corner in the room without worrying about the space used by the furniture. The latter mode, on the other hand, spirally approximates 3 feet in diameter as it travels in a coil until it is back to where it started. This is set to intensely and meticulously clean a certain localized area.

The new models of the Roomba (models 550 and above) have the Scheduled Cleaning Mode. This basically means that the daily cleaning time is programmed to start and end on schedule. When the robot is scheduled to clean, it occasionally flashes its next cleaning time as a reminder to its owner. When its internal clock reaches the specified time, it automatically leaves its Homebase to start the chore. It only stops when work is done or when the battery is empty. As soon as the mechanism senses the power drainage, it takes care of itself by returning once more to its port.

iRobot Roomba and how it works

Sun, 18 Oct 2009 13:52:26 +0000

So, how exactly does the iRobot Roombawork?

This amazing irobot vacuum cleaner helps you in the following ways:
1. The powerful suction and rotating brushes helps collect dust and lint that has gathered on your floors.
2. While you work, it automatically navigates itself for best cleaning coverage. All this while you concentrate on other things.
3. It cleans under and around furniture, into corners and along wall edges. It even covers areas that are hard to reach.
4. It self-adjusts when it shifts surfaces such as carpets and hard floors.
5. It has built-in sensors that can help the disc automatically avoid stairs, drop-offs and off-limit areas found in your home.
6. It is very easy to use and it doesn’t require a diploma just to be able to work it. All you need to do is press the clean button while the Roomba robot cleaner takes care of the rest.
7. You can recharge the Roomba in its Homebase and is able to clean as long as 120 minutes when fully charged.
8. Comes with 2 Virtual Walls that will serve as its barrier so that it knows where to not cross.

Homemakers can now go about their usual business without having to worry about furniture breaking. The best part of the deal is that the iRobot Roomba was designed to take care of itself. The makers behind the model definitely had today’s busy lifestyle in mind when they designed this product. The robot even puts itself away after it completes its chores. This intelligent robot vacuum cleaner has saved people hours of cleaning and household chores because of its basic design.

Don’t forget its a lot more fun with a robot doing the hard work.

iRobot Roomba’s Virtual Walls and Lighthouses

Sat, 17 Oct 2009 14:10:32 +0000

One of the great things about the iRobot Roomba robot cleaner is the fact that this tiny piece of innovation comes with Virtual Walls. The purpose behind this function is to create an invisible barrier that the Roomba will not cross. The walls can be set to block a certain portion that goes as far as eight feet long.
The Virtual Wall beam is shaped like a keyhole. A beam is set to create a small halo that prevents the robot from bumping into the wall. A larger cone-shaped section then impedes the cleaner from going into places you marked as restricted.

The higher models, such as the iRobot Roomba 535, come with Virtual Wall Lighthouses that were created to help the Roomba navigate around your home, find the Home Base, and allow the Roomba to clean one room before proceeding to its next task. When you set the robot to the Virtual Wall mode, you can indicate areas that are off-limits and assure yourself that the cleaner will never cross the line.As you know robots especially robot cleaners do as they’re told!

When it is set to the Lighthouse mode, the Virtual Wall Lighthouse helps irobot Roomba navigate around the room and clean an area at a time. All you need to do is place the lighthouses in the doorway between the two rooms.The irobot cleaner will begin to clean the first room before it navigates to the next room. Once the irobot Roomba has completed cleaning, it uses the lighthouses as guide to navigate itself back to its Homebase.

The generations of irobot vacuum cleaner units continue to improve . Its ultimate goal is to make cleaning easier for homemakers.

iRobot Roomba Accessories

Thu, 15 Oct 2009 16:13:50 +0000

The makers behind this innovative and helpful robot vacuum cleaner have designed several accessories to make work easier and simpler. Here are some of the supplementary items that you can use:
1. The Easy Clean Brush: this brush was made to handle households with pets. With hair scattered all over, you can now have the robot vacuum your floors and clear it from any form of dirt and hair.
2. Remote Control: you can now control your Roomba’s movements while you remain comfortably seated in your chair. This is especially handy for handicapped owners and couch potatoes!.
3. iRobot Scheduler: you can program your Roomba to clean around your schedule, even when you’re not at home. Just set the time for work to start, and as soon as it is done cleaning, the robot simply docks itself to the Homebase where it recharges its batteries for the next time it cleans.
4. Homebase: the Roomba automatically returns itself to this dock so that it can recharge its batteries.
5. Virtual Wall: this is used to keep the Roomba away from specified areas.
6. Virtual Wall Lighthouse: combines the functionality of the Virtual Wall with the Lighthouse mode. It helps contain the Roomba in one room until it is completely vacuumed. Once the task has been completed, it moves on to the next area.
7. OSMO: this is a dongle that attaches to the serial port. This updates a pre-2.1 Roomba’s firmware to version 2.1. It is also able to correct the “circle dance” problem that the second generation Roomba had.
8. Advanced Power System (APS) Battery: the rechargeable battery for all models. Extends the cleaning from 120 minutes to 200 minutes.

Don’t forget it’s a lot more fun than vacuuming the house yourself.

iRobot Roomba | What is the roomba

Thu, 15 Oct 2009 15:57:24 +0000

The iRobot Roomba comes in the shape of a disc. It measures 13.4 inches in diameter and less than 3.5 inches in height. On its front half portion is a large contact-sensing bumper mounted. The robot cleaner comes with an infrared sensor at its very center so that the robot is able to measure the room and pick up signs of barriers as it cleans around a certain area. A carrying handle is also fitted on the top for easy handling and storage.

Depending on the model purchased, it may come with one to three “Virtual Wall” infrared transmitter units. There have been several generations of units, with each model fitted with improvements that seem to break barriers of conventional household cleaning.

Electricity is not an issue while the Roomba operates because it comes with internal nickel-metal hydride batteries that can be recharged once cleaning is completed. To charge the batteries, the unit comes with a wall plug. The later generations, however, come with a self-charging Homebase. The robot cleaner itself will automatically try to find it with the use of its infrared beacon. Charging takes approximately three hours, with the Home Base designed to adapt to second and third Roomba generations. The earlier models came with a twelve-hour charger, although a three-hour rapid charger is also an option.

The latest set of iRobot Roomba no longer need to be told the size of the room. The built-in sensors are already able to handle this task. Now, users can simply press the Clean button and the Roomba is all set to go.